空段清掃器的用途
空段清掃器是指的安裝皮帶機尾部清掃非工作面的清掃器，也有人稱之為第三道清掃器，鏈條固定在皮帶機支架上，清掃器平放刮刀與皮帶接觸皮帶運行時，通過與皮帶摩擦清掃器皮帶. 
空段清掃器的組成結構?
空段清掃器有支架，聚氨酯刮刀，安裝鏈條組成. 
空段清掃器中間角度是60?，邊長=皮帶寬度 20公分.  
比如1米皮帶上的空段清掃器邊長=1.2米，因為是包頭安裝，總長=1.2米*2=2.4米. 
The use of empty section sweeper empty section sweeper refers to the installation of belt machine tail cleaning non-working surface of the sweeper, also known as the third way sweeper, chain fixed to the belt machine bracket, when the scraper is in contact with the belt, the belt is rubbed with the belt. What is the composition of an empty section sweeper? The empty section sweeper is composed of bracket, polyurethane scraper and installation chain. The Middle Angle of the empty section sweeper is 60 ? , side length = belt width 20 cm. For example, the side length of the empty section sweeper on the 1M belt = 1.2 m, because it is installed in Baotou, the total length = 1.2 m * 2 = 2.4 m.
空段清掃器規格
B800  1000  B1200 B1400,其他尺寸可以定制。
如果皮帶機是可逆的，就用I型清掃器，也叫一字型清掃器. 

我們還生產銷售H型合金清掃器、P型合金清掃器、H型聚氨酯清掃器、電動滾刷清掃器、被動滾刷清掃器和空段清掃器及配件，歡迎新老客戶咨詢。

濟寧貝斯機電設備有限公司 13165175381（微信同號）